Top 5 FAQ
-
If you press a cup button and no water comes out of the spout, it is possible that the machine has an air bubble which most often occurs when the tank runs empty or after a period of non-use.
Inissia/ Essenza mini/ CitiZ/ Pixie/ Expert/ Lattissima / Lattissima One/ Maestria / Creatista owners can fill the water tank, eject any capsule in the chamber, close the coffee lever and press the large cup button. The auto-prime function will push the air from the circuit. When water begins to flow through the spout, the air bubble has been released.
For U and Prodigio machine user, please open and close the slider few times. When water begins to flow through the spout, the air bubble has been released.
*Please note, we will suggest you to rest your coffee machine for 30 minutes after 5 trials.
For any further information on your machine, please contact the Nespresso Club at 0809 001 886 (toll-free) or by email.
If your question is not listed, please click here to contact us by email or call our toll-free number 0809 001 886.
Rate this answer -
As there are various serial numbers on the box and at the base of the Nespresso machine, the Nespresso serial number can be located in one of the following places:
- On the Drip Tray, printed on a removable sticker
- At the base of the machine, printed on a removable sticker
- On the original box the machine arrived inThe serial number consists of 19 alphanumeric characters which generally start with a '0' (zero).
If your question is not listed, please click here to contact us by email or call our toll-free number 0809 001 886.
Rate this answer -
In Taiwan you have a 2 year warranty on all machines and Aeroccino as long as you can provide the proof of purchase and serial number of your machine.
If your question is not listed, please click here to contact us by email or call our toll-free number 0809 001 886.
Rate this answer -
Nespresso capsules do not contain common food allergens, including dairy, gluten, nuts, soy, and eggs. References to "malt", "milk", or "cocoa" notes are components of the aromatic profile and do not suggest their presence in the coffee.
If your question is not listed, please click here to contact us by email or call our toll-free number 0809 001 886.
Rate this answer -
If the red light on your Aeroccino is flashing continually and the heating cycle stops prematurely, it means that your Aeroccino has detected that it is heating up too quickly. Please find below some common causes and resolutions for this:
- Using the Aeroccino again immediately after first use: The Aeroccino has a safety thermostat that stops the spinning and heating of milk if the temperature is too high. This is to prevent it from burning out. It must be rinsed with cold water, cleaned and allowed to cool before using again.
- Traces of milk left in the Aeroccino: The Aeroccino must be thoroughly cleaned after each use. If traces of milk are left in it, the temperature rises very fast and the Aeroccino stops spinning and heating much earlier. We suggest that the inside of your Aeroccino should be thoroughly cleaned with cool water and a Teflon-approved or non stick scourer after every use. It is advised to also rinse the whisk used to maintain the quality of your unit.If you require any further support for your Aeroccino (including warranty claims), please contact the Nespresso Club directly via our toll free number 0809-001-886 or email from our website. A trained Coffee Specialist will be happy to assist you.
If your question is not listed, please click here to contact us by email or call our toll-free number 0809 001 886.
Rate this answer
